Mimco is pleased to announce the launch of TECO’s new line of washdown motors. The company’s new product features stainless steel construction and has earned full certification by the Baking Industry Sanitation Standards Committee (BISSC).

Washdown motors
Regular high-pressure liquid cleaning is required in food processing, pharmaceutical and other applications. It is imperative to keep water and condensation out of the motor. When water penetrates the motor, it can lead to premature electrical or mechanical failure. Electric motors not specifically designed for this environment will fail quickly leading to costly downtime
In response to this need, motor manufacturers created “washdown” motors. These motors are designed to allow the motor to withstand these elements.


TECO’s washdown motors feature;
304 Stainless Steel construction
IP66 enclosures (IP69K Option Available)
SUS304 Stainless Steel Shaft with Keyway and Key, Frame, End Brackets, Hardware
Viton Double Contact Lip Type Seal on Both Drive End and opposite Drive End with O-Rings; Bearings Pre-Packed with Polyrex EM Grease
Epoxy Potted Leads in Conduit Threaded Cover Sealed with O-Rings
BISSC Third Party Verified

Other features;
Available from ½ to 10 HP
60 Hz – 230/ 460V (Usable on 208V),
50 Hz – 190/ 380V
TENV enclosures available up to 3 HP
C-Flange with Feet, also available as a Round Body with C-Face
Class B Temperature Rise, 40˚C Ambient Temp.,
1.15 Service Factor,
Class F Insulation
EISA Compliant with NEMA Premium Efficiencies
36 Month Warranty from Date of Manufacture

Washdown Motor Applications
Conveyors
Packaging Machines
Fans
Food Processing
Pharmaceutical
Beverage
Pumps (Centrifugal, Positive Displacement, Progressive Cavity)
Mixing Equipment
Car Washes

In addition to washdown motors TECO Westinghouse also offers their E510 Series, Variable Frequency Drives for Washdown/Food Grade Service.

RATINGS:
With Disconnect: ½ – 20 HP (230V, 3-Phase), 1 – 25 HP, (460V, 3-Phase)
Without Disconnect: ½ – 3 HP (230V, 1-Phase), ½ – 15 HP (460V, 3-Phase)

FEATURES:
NEMA 4 Enclosures
Sensorless Vector and V/F Mode
LCD Keypad with 5-Digit Display
0 – 599 Hz Speed Range
PID Control
Diagnostic Registers for Troubleshooting
Dedicated Disable Shutdown Input
Flexible Input/ Output Configurations that Accept Normally Open or Normally Closed
UL, cUL, and CL approved
Dynamic Braking Transistor as Standard
Built-in PLC Functionality
Built-in Modbus Protocol via RJ45 interface

For more information on TECO’s new line of wash down motors and VFD Drives, please reach out to our Mimco specialists at info@mimco.com.

Leave a Reply

Your email address will not be published.